This fabric makes full use of the comprehensive advantages of the three fibers. Pure cashmere fabrics have low strength, are easy to fuzz and pilling, are easy to damage in alkaline dyeing environment

This fabric makes full use of the comprehensive advantages of the three fibers. Pure cashmere fabrics have low strength, are easy to fuzz and pilling, are easy to damage in alkaline dyeing environment, and their moisture conductivity and quick drying High quality China Air Through Nonwoven are poor, and they are easy to generate static electricity. The front is smooth and flat, the back is soft and warm, has good moisture absorption and perspiration, strong wrinkle resistance, antistatic and is not easy to fuzz and pilling.

Using functional powder preparation and melting diffusion technology, surface modification and fiber-forming weaving technology, combined with the interaction mechanism of silver ion and bamboo charcoal antibacterial function, the silver-containing bamboo charcoal polyester composite functional fiber fabric is prepared after interweaving, and the antibacterial rate of the fabric is tested. The variety of fiber materials always makes people dizzy. Up to 99%, the sterilization rate is up to 91%, and the antibacterial and sterilization effect is still very good after repeated washing. The rapid development of technology and modern textile industry has eliminated the shortcomings and shortcomings of polyester fiber.

The fiber not only has the characteristics of ordinary flat fiber, such as low stiffness, good gloss, and soft touch, but also due to the addition of nano-silicon to increase the specific surface area of ​​the fiber, thereby accelerating the transfer and conversion rate of liquid water to vapor state, and has good air permeability, Moisture conductivity and cooling sensation function. Polyester fiber quick-drying functional fabric Many fabrics with moisture absorption and quick-drying function, mostly through fiber cross-section modification or polyester fiber as a carrier to add functional materials to achieve moisture absorption and quick-drying function. Polyester fiber/cotton blended yarn has excellent moisture absorption and perspiration properties, and has less hairiness, high strength, good abrasion resistance, and the fabric does not foam.

Our country's product is called 'polyester', which is also the most familiar name. But not all polyester fibers are called polyester. Ultra-fast-drying differential polyester fiber is a kind of nano-silicon flat polyester fiber. High-end clothing usually requires a combination of multiple fabrics. Polyester fiber blended fabric Utilizing the characteristics of polyester fiber, using polyester fiber/cotton blended yarn as warp yarn, cotton/cashmere blended yarn and mercerized wool yarn as weft yarn, developed a double-sided yarn-dyed fabric.

In the process of clothing design, production, and processing, in fact, the most difficult thing is to perfectly combine fabrics with different characteristics, and at the same time, it feels completely integrated when worn. Its light fastness is better, the light fastness ability is better than natural fiber fabrics, acid and alkali corrosion resistance, and it is not afraid of molds, insects, and polyester fiber blended fabrics have excellent gloss. In particular, the blending of polyester fiber and cotton/silk/linen fibers balances all aspects of the performance and functions of a fabric. Polyester fiber is a big category, and polyester is one of them. Polyester fiber antibacterial fabric Bamboo charcoal polyester and its knitted fabric have far-infrared emission, anti-ultraviolet, shielding electromagnetic radiation, antibacterial, antibacterial and deodorizing functions.

Polyester fiber is the English translation of the international common name. Poor quality, poor texture, easy to crack, low-end. It has become an increasingly dependent fabric for many international big names. Polyester fiber has high strength and elastic recovery ability, so it is strong, wear-resistant, wrinkle-resistant and non-ironing. It has excellent clothing performance and is a high-end fashion for autumn and winter clothing. One of the fabrics. Three technical answers to functional polyester fabrics At present, many international big-name manufacturers are using polyester fiber blended fabrics for fashion clothing. It can be seen that the technical support is not cheap.. It is made by adding nano-scale silicon powder to the polyester spinning melt and spinning through a flat wavy cross-section spinneret.

As early as 2016, Donghua University, a national 'Project 211' construction university located in Shanghai, developed a functional series of polyester fibers with an output value of 160 million. The fabric can bear the movement and stretching of the human body together, and show the beauty. The following are some misunderstandings and misunderstandings of polyester fiber-containing clothes sorted out from the Internet

Megosztás a facebookon

Generally speaking, medical masks adopt a multi-layer structure, High quality China KN95 PARTICULATE RESPIRATOR with single-layer spunbond non-woven fabric on both sides, and single-layer or multi-layer melt-blown non-woven fabric in the middle, that is, melt-blown fabric. Lin Youkuai, deputy general manager of Huahao Nonwovens,

As for the specific loss, it depends on the cost of making up the raw materials. 'Now the whole situation has become very passive. 'The company may lose money' and 'there is a loss', where do you start with this statement? Lin Youkuai explained that the company's non-woven fabrics stocks of raw materials are only more than 1,000 tons, and there are still hundreds of tons of shortfalls. As a result, the ability of non-woven fabric factories to receive new orders has become weaker and weaker, and as a result, many mask factories cannot order non-woven fabrics.

Now the price of polypropylene has soared so fast that it can no longer cover the previous low-priced orders. The price of non-woven fabrics has risen, and companies that produce non-woven fabrics should have been happy to see it, but Lin Youkuai said that this is not a 'good thing' for them. Due to the development of overseas epidemics, the demand for meltblown non-woven fabrics continues to grow, and the demand for spunbonded non-woven fabrics is also increasing rapidly. Some raw materials will be supplemented in the past few days. yuan.

It is reported that the previous polypropylene market price was 6,000 yuan/ton, and recently it has risen to 14,000 yuan/ton, and for a while, it has risen to more than 30,000 yuan/ton. It is called cloth because of its appearance and certain properties. However, the raw material reserves give him a headache. difficult. . The skyrocketing price of raw material polypropylene makes it very difficult for non-woven fabric companies, because after the existing raw materials are used up, if the raw materials are imported according to the low price of the previous customers, the price of the raw materials has risen so expensive, Lin Youkuai That said, losses are inevitable. It has many production processes, including spunbond, meltblown, Spunlace, meltblown fabric is one of the non-woven fabrics.

Generally speaking, medical masks adopt a multi-layer structure, High quality China KN95 PARTICULATE RESPIRATOR with single-layer spunbond non-woven fabric on both sides, and single-layer or multi-layer melt-blown non-woven fabric in the middle, that is, melt-blown fabric. Lin Youkuai, deputy general manager of Huahao Nonwovens, told reporters that the current market speculation of nonwovens is very strong. The phenomenon of roasting and roasting of non-woven fabrics in the market directly drove the price of upstream raw material polypropylene to soar, and the increase in raw material prices further caused the company's external procurement to become very difficult.

It is expected to cause a lot of losses.The price increase of non-woven fabrics is not a 'good thing' Non-woven fabric, also known as non-woven fabric, is composed of oriented or random fibers.'. In just 10 days, the price of nonwovens has risen from more than 10,000 yuan per ton to more than 100,000 per ton. Lin Youkuai said that upstream and downstream are influencing each other

Megosztás a facebookon